• Bruk prefiks-funksjonen når du oppretter nye poster i dette forumet.

Solgt/Kjøpt Styreboks med 3350w Camco ULWD element - 2950kr

Selger en nybygget styre boks med Auber pid, hadde noen deler liggende og satte derfor sammen denne.
Pakken inneheholder det du trenger for å automatisere bryggeriet: RTD temperatur probe, pumpe tilkobling og 3350w Camco ULWD varmeelement. Perfekt til både mesking og kok.

Kan også levere varmeelemente med 1,5" tri clamp kobling i stede for mutter og skive med O-ring pakning.

2950kr. kan sendes.


IMG_1568.JPG
 

Vedlegg

  • IMG_1474.JPG
    IMG_1474.JPG
    142,5 KB · Sett: 75
Sist redigert:
  • Like
Reaksjoner: 30B
Er det slik å forstå at potensiometeret gjør det mulig å redusere effekten på varmeelementet?


Sent from my iPhone using Tapatalk
 
det er ikke et potensiometer som styrer SSRen , men hvordan den regulerer står greit her

Hva skal du bruke den til?



EZboil is a digital power regulator designed to automate the liquid boiling and mashing processes. In boil mode, it can bring the liquid to boil in the maximum speed; then automatically reduce the power to maintain the boil at a desired level; and after maintaining at boiling for a predetermined time, it can shut off the power. This controller can be used for wort boiling during the beer brewing process or for cooking food that involves a long simmering time.

The EZboil can also be used as a temperature controller for mashing. In mash mode, its temperature control function utilizes an artificial intelligent algorithm optimized for mashing application. It is easier to understand and more convenient to operate than a PID controller. Regular PID controllers may have overshoot or slow response issues when not properly tuned. However, for most mashing systems, EZboil can hold the temperature within one degree right out of the box.

This controller was developed based on our Digital SSR Power Regulator (DSPR1). It provides linear and uniform power output with 1% resolution. The power adjustment is done with a rotary encoder that is easier to operate than the press button adjustment type. The major improvements of this new controller are the addition of temperature sensor input and programmable timer function. Unlike DSPR1, the built-in temperature measurement capability allows temperature-triggered power output adjustment as well as the timed output shut-off.
 
det er ikke et potensiometer som styrer SSRen , men hvordan den regulerer står greit her

Hva skal du bruke den til?



EZboil is a digital power regulator designed to automate the liquid boiling and mashing processes. In boil mode, it can bring the liquid to boil in the maximum speed; then automatically reduce the power to maintain the boil at a desired level; and after maintaining at boiling for a predetermined time, it can shut off the power. This controller can be used for wort boiling during the beer brewing process or for cooking food that involves a long simmering time.

The EZboil can also be used as a temperature controller for mashing. In mash mode, its temperature control function utilizes an artificial intelligent algorithm optimized for mashing application. It is easier to understand and more convenient to operate than a PID controller. Regular PID controllers may have overshoot or slow response issues when not properly tuned. However, for most mashing systems, EZboil can hold the temperature within one degree right out of the box.

This controller was developed based on our Digital SSR Power Regulator (DSPR1). It provides linear and uniform power output with 1% resolution. The power adjustment is done with a rotary encoder that is easier to operate than the press button adjustment type. The major improvements of this new controller are the addition of temperature sensor input and programmable timer function. Unlike DSPR1, the built-in temperature measurement capability allows temperature-triggered power output adjustment as well as the timed output shut-off.
Sendte deg en melding om fler spørsmål. Ikke nødvendig å ta de her i posten tenker jeg.
 
Tilbake
Topp